The Power Analyzer and Conditioning System unit provides the required interface between the AC source, the Equipment Under Test and the PC. A high current (75 Arms) version, PACS-3-75, is supplied with MX-CTS systems.
| PACS Model |
PACS-1
|
PACS-3 (PACS-3-75)
|
|
| Number of phases |
1
|
3
|
| Channels: Voltage and Current |
2
|
6
|
| Connector Style : Front panel |
CEE/77 front
|
None
|
| Connector Style : Rear panel |
terminal block
|
terminal block
|
| Maximum voltage : Front panel |
240 Vac
|
N/A
|
| Maximum voltage : Rear Panel |
300 Vac
|
480 Vac
|
| Maximum current : Front panel |
16 Arms
|
N/A
|
| Maximum current: Rear Panel |
40 Arms
|
40 Arms/ph (75 Arms/ph)
|
IEC 60725 Reference :
RP-Series CTS |
internal
|
N/A
|
| Impedance(1) : iX-Series CTS |
programmable Z
|
programmable Z
|
| Optional Lumped |
option -LR1
|
option -LR3/-LR4
|
| Input Power : Voltage |
115 / 230 V ± 10 %
|
115 / 230 V ± 10 %
|
| Input Power : Current / Frequency |
< 0.5 A / 50 or 60 Hz
|
< 0.75 A / 50 or 60 Hz
|
| Dimensions : HxWxD : Inches |
3.5 x 16.8 x 22
|
3.5 x 16.8 x 22
|
| Dimensions : HxWxD : CM |
89 x 427 x 560
|
89 x 427 x 560
|
|
 |
|
|
(1) MX-CTS systems do not offer programmable impedance and require option -LR4/OMNI-3-75 for Flicker test. Options -LR1 and -LR3
may be added to 3001iX-CTS / 5001iX-CTS or 15003iX-CTS configurations to be used in lieu of the standard programmable impedance.
Option -LR1 is built-in to PACS-1. Option -LR3 and -LR4 consist of OMNI-3-18i and OMNI-3-37i respectively. See OMNI data under options
on last page. |
